SABIC® PP FPC55

About
SABIC® PP FPC55 is a grade developed for the thin wall packaging market. The grade is nucleated and is characterised by excellent flow behaviour in combination with an improved stiffness to impact balance. SABIC® PP FPC55 allows for very cost efficient processing on the basis of easy mould filling, short cycle times and improved part consistency in combination with pigments. It contains an antistatic package. SABIC® PP FPC55 is typically used in thin wall packing applications both for food and non-food segments. This includes pails & containers, yellow fats/margarine tubs and dairy cups. In de caps and closure segment, the grade could be used for thin walled spray through caps, amongst other. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&&

About

SABIC® PP FPC55 is a grade developed for the thin wall packaging market. The grade is nucleated and is characterised by excellent flow behaviour in combination with an improved stiffness to impact balance. SABIC® PP FPC55 allows for very cost efficient processing on the basis of easy mould filling, short cycle times and improved part consistency in combination with pigments. It contains an antistatic package. SABIC® PP FPC55 is typically used in thin wall packing applications both for food and non-food segments. This includes pails & containers, yellow fats/margarine tubs and dairy cups. In de caps and closure segment, the grade could be used for thin walled spray through caps, amongst other. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good liquidity,Nucleation,Quick molding cycle,Good stripping performance,Block Copolymer,Antistatic property
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792, ISO 1183
Melt Flow Rate
230℃，2.16kg	55	g/10min	ASTM D1238，ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	5.0	kJ/m²
0℃	7.0	kJ/m²
23℃	9.0	kJ/m²
Impact strength of cantilever beam notch
-20℃	45	J/m	ASTM D256-A
0℃	60	J/m	ASTM D256-A
23℃	70	J/m	ASTM D256-A
-20℃	5.0	kJ/m²	ISO 180-1A
0℃	6.0	kJ/m²	ISO 180-1A
23℃	8.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ASTM D648
0.45 MPa, unannealed	95.0	℃	ISO 75-2/Bf
1.8 MPa, unannealed	60.0	℃	ASTM D648
1.8 MPa, unannealed	55.0	℃	ISO 75-2/Af
Vicat Softening Temp
—	150	℃	ASTM D1525，ISO 306/A120 6 6
B120	76.0	℃	ASTM D1525, ISO 306/B120 7 7

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	62		ISO 868
Rockwell hardness
R-level	95		ASTM D785
Tensile modulus
1% secant	1550	MPa	ASTM D638
—	1500	MPa	ISO 527-2/1A/1
tensile strength
yield	24.0	MPa	ASTM D638
yield	25.0	MPa	ISO 527-2/1A/50
Tensile strain
yield	4.0	%	ASTM D638
yield	4.0	%	ISO 527-2/1A/50

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.20 in/min
3. 2.0 in/min
4. testbar 80104mm
5. Rate B (120°C/h), Loading 1 (10 N)
6. Rate B (120°C/h), Loading 2 (50 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.