| About |
|---|
| ADVANCENE™ EE-3916-AAH is a hexene based medium density polyethylene classified as (PE80), material with an optimum balance between flexibility and strength, produced with advanced gas phase PE process. Long-term stability is ensured by an optimized stabilization system. Characteristics: ADVANCENE™ EE-3916-AAH is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth. Thanks to the structure, which gives outstanding extruability.&& |
| Product Description | |
|---|---|
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Renewable resources,Good tear strength,Hexene copolymers |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.939 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 16 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.0 | MPa | |
| fracture | 28.0 | MPa | |
| Tensile strain | |||
| fracture | > 800 | % | ASTM D638 |
| Bending modulus | |||
| 2% secant | 690 | MPa | ASTM D790 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Designation | PE-80 | ISO 12162 | |
| Minimum Required Strength | > 8.00 | MPa | ISO 9080 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 180 to 210 | °C | |
| Barrel 3 zone temperature | 180 to 210 | °C | |
| Barrel 5 zone temperature | 180 to 210 | °C | |
| Melt temperature | 200 to 210 | °C | |
| Nozzle temperature | 200 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |