| About |
|---|
| BS 2571:90 Types E6, M6 Formulated without lead-based additives Lead-free version of GA8/718&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good surface appearance,Lead content is low to none |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | BS 2782 620A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | -45 | ℃ | BS 2782 151A |
| Low temperature flexibility | -35 | ℃ | BS 2782 150B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 57 | BS 2782 365B | |
| tensile strength | 10.5 | MPa | BS 2782 320A |
| Tensile strain | |||
| fracture | 380 | % | BS 2782 320A |
| BS Softness | 86 | BS 2782 365A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |