| About |
|---|
| PrimeCast 101, a grey powder on polystyrene basis, is suited especially for investment casting due to its excellent dimensional accuracy and its low melting point. Laser-sintered parts made from PrimeCast 101 possess excellent material properties: excellent dimensional accuracy very high surface quality good strength for use as lost pattern The typical application for PrimeCast 101 is the production of lost patterns for the plaster and ceramic shell casting process. The material is optimised for minimum residue ash content after burning-out. Another application for PrimeCast 101 is the production of master patterns for vacuum casting, herby it is advised to infiltrate the parts with e.g. epoxy resin.&& |
| Product Description | |
|---|---|
| Generic | PS (special type) |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good surface appearance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.770 | g/cm³ | Internal Method |
| decomposition temperature | 229 to 555 | ℃ | DIN 51006 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1600 | MPa | ISO 527-2 |
| tensile strength | 5.50 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 0.40 | % | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 105 | ℃ | ISO 11357 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |