| About |
|---|
| High-temperature resistance, innoxious, flame resistance, radiation resistance, solvent resistance, electrical insulation properties. The compounds of PPS-ha and PTFE possess new characteristic of non-stick and abrasion resistance. High adhesion to metal. It can be used to make coating material which can be usd as inner/outer coating of guideway, containers, metal mold, food pots, reaction kettles, storing tanks, storing cisterns, pipes and electric components.&& |
| Product Description | |
|---|---|
| Supplier | Deyang |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | No viscosity,Gamma radiation,Flame Characteristics,High Heat Resistance,Good bond,Lubricating,Good wear resistance,Solvent resistance,Nontoxicity,Insulation |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 315℃，5.0kg | 780 | g/10min | Internal Method |
| Water absorption rate | |||
| saturated | 0.32 | % | Internal Method |
| molecular weight | 22600 | ||
| Ash Content | 0.40 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 1.18 mm |
| 3. Gel Chromatography |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |