| About |
|---|
| Product Description | |
|---|---|
| Supplier | DuPont |
| Material Status | Commercial: Negative |
| Features | Soft,Solvent resistance,Good wear resistance |
| Availabilitys | Latin America,Africa & Middle East ,North America,Europe,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | ISO 1183 |
| Spiral flow length | 28.0 | cm | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| 100% strain | 7.3 | MPa | ISO 37 |
| fracture | 3.3 | MPa | ISO 37 |
| elongation at break | ＞300 | % | ISO 37 |
| Shore hardness | |||
| Shaw’s A | 70 | ISO 868 | |
| tear strength | |||
| TD | 41 | kN/m | ISO 34-1 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 90 | °C | null |
| Drying time | 3 – 6 | hr | null |
| Recommended maximum moisture content | ≤ 0.030 | % | null |
| Processing (melt) temperature | 205 | °C | null |
| Mold temperature | 10 – 40 | °C | null |
| Back pressure | 0.7 – 1.4 | MPa | null |
| Screw speed | 0.4 | m/s | null |
| Exhaust hole depth | 0.013 – 0.025 | mm | null |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |