IDI SMC S42 (Glass Content 30%)

About
PRODUCT SERIES: S42 SERIES SMC PRODUCT DESCRIPTION: LOW PRESSURE, LOW DENSITY, LOW SMOKE These materials provide low smoke generation and flame spread in accordance with ASTM E162, E662 and E84 standards.&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Low smoke,Flame Characteristics,Low density
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50 to 1.70	g/cm³	ASTM D792
Shrinkage rate	0.050 to 0.20	%	ISO 2577
Water absorption rate
23℃，24hr	0.30	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	1000	J/m	ASTM D4812

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	> 204	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame Spread Index	25.0		ASTM E162

optical performance	Nominal value	Test method
Optical Density		ASTM E662
Non-Flaming @ 1.5 min	0.00	ASTM E662
Non-Flaming @ 4 min	10.0	ASTM E662

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	30 to 60		ASTM D2583
Tensile modulus	11700	MPa	ASTM D638
tensile strength	68.9	MPa	ASTM D638
Bending modulus	6890	MPa	ASTM D790
bending strength	145	MPa	ASTM D790
compressive strength	131	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.