Bapolene® LL3039 BLK

About
Bapolene LL3039F BLK is a black LLDPE compound specifically designed for rotational molding applications. It offers excellent Environmental Stress Cracking Resistance, warp resistance, and impact strength. It is available in pellet or powder form. UV stabilized. This product meets FDA standards for food contact applications.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,High elastic,Food contact compliance,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.939	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	3.5	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693B
10% non-ionic detergent, F50	> 500	hr
100% non-ionic detergent, F50	1000	hr

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	17.2	MPa	ASTM D638
Tensile strain
fracture	780	%	ASTM D638
Bending modulus
Secant	760	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	53.0	℃
1.8 MPa, unannealed	39.5	℃
Vicat Softening Temp	112	℃	ASTM D1525

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.