| About |
|---|
| Flexible engineering elastomers SKYPLETE L-series have both the properties of rubbers and engineering plastics, offering broad range of hardness/softness. LE100 Flexibility and resilience Hardness shore D: 40 (28 to 80 are available) Good performance in a wide range of temperature Chemical resistance UV resistance Nozzle temp: 220 – 240°C Bed temp: 50 – 60°C&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,High Flexibility,Heat Resistance, Good,Solvent resistance,Heat Stabilized |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| balance | < 0.20 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 50.0 | ℃ | ASTM D648 |
| Melting temperature | 160 | ℃ | ASTM D3418 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 93 | ||
| Shaw’s D | 40 | ||
| tensile strength | |||
| 100% strain | 7.85 | MPa | |
| 200% strain | 8.83 | MPa | |
| 300% strain | 9.81 | MPa | |
| Tensile strain | |||
| fracture | > 400 | % | ASTM D638 |
| bending strength | 4.41 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.11 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |