Trademark PE LLB1918C

About
Trademark PE LLB1918C is a Linear Low Density Polyethylene product. It is available in North America. Applications of Trademark PE LLB1918C include bags/liners, packaging, film and food contact applications. Characteristics include: Antiblock Butene Comonomer Food Contact Acceptable Good Sealability Puncture Resistant&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Good heat sealing,Good dissection,High anti-blocking,Food contact compliance,Butylene copolymer,Puncture Resistant
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Secant modulus			ASTM D882
1% secant, MD: 25 µ m, blow molded film	186	MPa	ASTM D882
1% secant, TD: 25 µ m, blow molded film	190	MPa	ASTM D882
tensile strength			ASTM D882
MD, fracture, 25 µ m, blow molded film	45.5	MPa	ASTM D882
TD, fracture, 25 µ m, blow molded film	31.7	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 25 µ m, blow molded film	570	%	ASTM D882
TD, fracture, 25 µ m, blow molded film	730	%	ASTM D882
Drop hammer impact
25 µ m, blow molded film	110	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 25 µ m, blow molded film	130	g	ASTM D1922
TD: 25 µ m, blow molded film	320	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45 °, 25.4 µ m, blow molded film	45		ASTM D2457

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	204 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.