| About |
|---|
| AvaSpire® AV-630 PAEK film is a unique thermoplastic film that is characterized by a distinct combination of properties, which include strength, ductility, fatigue resistance, high purity and excellent chemical resistance to organics, acids, and bases. These properties make it well-suited for applications in aerospace, electronics, transportation, chemical processing, and other industrial uses.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PAEK |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good Dimensional Stability,Ductility,Good disinfection,Gamma radiation,Flame Characteristics,High Heat Resistance,Fatigue resistance,Solvent resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.20 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tear resistance | 9.0 | cN | ASTM D1004 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | |||
| — | 50 | µm | |
| — | 100 | µm | |
| Secant modulus | ASTM D882 | ||
| MD | 2040 | MPa | ASTM D882 |
| TD | 2000 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 71.7 | MPa | ASTM D882 |
| TD, yield | 68.9 | MPa | ASTM D882 |
| MD, fracture | 86.9 | MPa | ASTM D882 |
| TD, fracture | 83.4 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, yield | 5.0 | % | ASTM D882 |
| TD, yield | 5.0 | % | ASTM D882 |
| MD, fracture | 130 | % | ASTM D882 |
| TD, fracture | 130 | % | ASTM D882 |
| Drop hammer impact | 830 | g | ASTM D1709 |
| Tear resistant vine ductility | 250 | gf | ASTM D1922 |
| Area coefficient | 149 | ft²/lb/mil |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 158 | ℃ | ASTM D3418 |
| Melting peak temperature | 340 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| MD：-50~50℃ | 4.3E-5 | 1/℃ | ASTM E831 |
| Thermal conductivity coefficient | 0.24 | W/m/K | ASTM E1530 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.9E+17 | ohms | ASTM D257 |
| Volume resistivity | 1.6E+14 | ohms·cm | ASTM D257 |
| Dielectric strength | |||
| 0.05 mm | 200 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 60 Hz | 3.06 | ASTM D150 | |
| 1 kHz | 3.10 | ASTM D150 | |
| 1 MHz | 3.05 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 38 | % | ASTM D2863 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tear properties |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |