KMI PP KM-023IB

About
KM-023IB is a high impact and stiffness PP for injection molding applications with excellent impact strength and high stiffness. This grade shows high falling weight impact at low temperature and good UV stability. It is suitable for carte box, pallet and applications which need the high impact strength/stiffness balance. Food Contact Application: KM-023IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Excellent stiffness/impact balance High falling weigh impact at low temperature&&

About

KM-023IB is a high impact and stiffness PP for injection molding applications with excellent impact strength and high stiffness. This grade shows high falling weight impact at low temperature and good UV stability. It is suitable for carte box, pallet and applications which need the high impact strength/stiffness balance. Food Contact Application: KM-023IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Excellent stiffness/impact balance High falling weigh impact at low temperature&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High impact resistance,Food contact compliance,Block Copolymer,low-temperature impact resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	5.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	28.4	MPa	ASTM D638
Tensile strain
fracture	400	%	ASTM D638
Bending modulus	1320	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	> 390	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	115	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.