ColorRx® PE2-0400RX

About
Biocompatible, High Density Polyethylene for healthcare applications and pharmaceutical packaging with excellent Environmental Stress Cracking Resistance. Sterilizable by EO and gamma radiation up to 35kGv.&&

Product Description
SupplierLTL Color
GenericHDPE
Material StatusCommercial: Negative
FeaturesBiocompatible,Radiation disinfection,High density,High ESCR,Ethylene oxide disinfection
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density0.954g/cm³ASTM D792
Melt Flow Rate
190℃,2.16kg4.0g/10minASTM D1238
Shrinkage rate
MD:3.2 mm1.0 to 2.0%

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45 MPa, unannealed65.0ASTM D648

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D61 ASTM D785
tensile strength
yield21.7MPaASTM D638
Tensile strain
yield10%ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.