GAPEX® HT RNP23LB03BK

About
GAPEX® HT RNP23LB03BK is a Polyamide + PP (Nylon+PP) product filled with 23% glass fiber. It is available in Latin America or North America. Primary characteristic: heat resistant.&&

Product Description
Supplier	Ferro
Generic	PA+PP
Material Status	Commercial: Active
Features	High Heat Resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.22	g/cm³	ASTM D792
Melt Flow Rate
275℃，5.0kg	43	g/10min	ASTM D1238
Shrinkage rate
TD	1.3	%	ASTM D955
MD	0.50	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	117	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	4.0	%	ASTM D638
Bending modulus			ASTM D790
1% secant, 23 ℃	5100	MPa	ASTM D790
Tangent, 23 ℃	5140	MPa	ASTM D790
bending strength
Yield, 23 ℃	15.9	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	1100	J/m	ASTM D256
23℃	110	J/m	ASTM D256
Drop hammer impact	0.678	J	ASTM D5420

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	191	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.