Koylene ADL-CP AER003N

About
Koylene ADL-CP is the brand name of polypropylene Copolymer spheribeads with external additivation manufactured and marketed by IPCL from its facility at Baroda complex through Spheripol/ Addipol technology adopting the process know-how of M/S Basell,The Netherlands . Koylene ADL-CP AER003N is a Random Copolymer grade manufactured to produce Pipes for Pressure applications, Sheets for Thermoforming and Extrusion Blow moulding FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on “Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water”. Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909.The grade and the additives also comply with the FDA : CFR Title 21,177.1520, Olefin polymers.&&

About

Koylene ADL-CP is the brand name of polypropylene Copolymer spheribeads with external additivation manufactured and marketed by IPCL from its facility at Baroda complex through Spheripol/ Addipol technology adopting the process know-how of M/S Basell,The Netherlands . Koylene ADL-CP AER003N is a Random Copolymer grade manufactured to produce Pipes for Pressure applications, Sheets for Thermoforming and Extrusion Blow moulding FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on “Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water”. Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909.The grade and the additives also comply with the FDA : CFR Title 21,177.1520, Olefin polymers.&&

Product Description
Supplier	Reliance
Generic	PP copolymer
Material Status	Commercial: Active
Features	Food contact compliance,Copolymer
Availabilitys	Asia Pacific
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
230℃，2.16kg	0.30	g/10min	ASTM D1238
230℃，5.0kg	1.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 3.20 mm, injection molding	27.0	MPa	ASTM D638
Tensile strain			ASTM D638
Yield, 3.20 mm, injection molding	14	%	ASTM D638
Fracture, 3.20 mm, injection molded	500	%	ASTM D638
Bending modulus
3.20 mm, injection molded	850	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm, injection molded	600	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, 3.2 mm, injection molded	92.0	℃	ASTM D648
Vicat Softening Temp	130	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type I
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.