Adell Polyamide BD-30

About
Adell Polyamide BD-30 is a Polyamide 6 (Nylon 6) material. It is available in North America. Primary attribute of Adell Polyamide BD-30: Impact Resistant.&&

Product Description
GenericPA6
Material StatusCommercial: Active
FeaturesHigh impact resistance
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density1.07g/cm³ASTM D792
Shrinkage rate
MD1.1 to 1.4%ASTM D955
Water absorption rate
24hr1.5%ASTM D570

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃,3.2mm960J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature ASTM D648
0.45 MPa, unannealed171ASTM D648
1.8 MPa, unannealed53.3ASTM D648
Melting temperature204 to 216

MECHANICALNominal valueUnitTest method
Rockwell hardness ASTM D785
M-level70 ASTM D785
R-level112 ASTM D785
tensile strength48.3MPaASTM D638
Tensile strain
fracture70%ASTM D638
Bending modulus1590MPaASTM D790
bending strength67.6MPaASTM D790
compressive strength44.8MPaASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.