| About |
|---|
| LTP 8100 serials is reinforced composite materials with high performance based on polyolefin and PPS, and are extensively applied in injection mold to structure and parts of machine, electric appliance and automobiles. It is used to replace materials of PA PBT (PET), PPO (PPE), and PC/ABS serial. The LTP 8100 serials materials have the characteristics of high impact strength, high dimensional stability and low moisture absorption.&& |
| Product Description | |
|---|---|
| Supplier | Letian |
| Generic | PPS |
| Material Status | Commercial: Active |
| Features | High impact resistance,Good Dimensional Stability,Low moisture absorption |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD：3.0 mm | 0.80 | % | |
| MD：3.0 mm | 0.50 | % | |
| Water absorption rate | |||
| saturated | 0.10 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 80.0 | MPa | GB/T 1040 |
| Tensile strain | |||
| fracture | 15 | % | GB/T 1040 |
| bending strength | 120 | MPa | GB/T 1042 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 18 | kJ/m² | GB/T 1043 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | > 165 | ℃ | GB/T 1634 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 2.0E+15 | ohms | GB/T 1410 |
| Volume resistivity | 5.0E+14 | ohms·cm | GB/T 1410 |
| Dielectric strength | 17 | kV/mm | ASTM D149 |
| Dielectric constant | GB/T 1409 | ||
| 25 ℃，1 kHz | 3.20 | GB/T 1409 | |
| 25 ℃，1 MHz | 3.20 | GB/T 1409 | |
| Dissipation factor | GB/T 1409 | ||
| 25℃，1 kHz | 3.0E-3 | GB/T 1409 | |
| 25℃，1 MHz | 3.0E-3 | GB/T 1409 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB V-0 | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 80x80x3 mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |