228H - SOLIAO

About

Product Description
Generic	PP not specified
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
proportion	0.95	g/cm³	ASTM D792
Mold shrinkage rate	1.2-1.7	%	ASTM D955
Melt flow rate	15-20	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	127	°C	ASTM D648
Flame retardant level
1.5mm	HB		UL94

MECHANICAL	Nominal value	Unit	Test method
tensile strength	32	MPa	ASTM D638
bending strength	50	MPa	ASTM D790
Notch impact strength	4.4	J/m	ASTM D256
Rockwell hardness	101		ASTM D785

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.00E+15	ohm	ASTM D257

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.