RELENE® E52009

About
E52009 is a High Density Polyethylene (HDPE) grade with low gel content, excellent orientation characteristic and negligible water carry-over. This grade is recommended for making raffia tapes and monofilaments (Diameter >0.20 mm) with excellent balance of high tenacity and good elongation.&&

Product Description
Supplier	Reliance
Generic	HDPE
Material Status	Commercial: Active
Features	Low speed solidification point,Food contact compliance,Low water portability
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
tensile strength			ASTM D882
MD, yield, 40 µ m, blow molded film	34.5	MPa
TD, yield, 40 µ m, blow molded film	37.5	MPa
MD, fracture, 40 µ m, blow molded film	50.0	MPa
TD, fracture, 40 µ m, blow molded film	45.0	MPa
Tensile strain			ASTM D882
MD, fracture, 40 µ m, blow molded film	900	%
TD, fracture, 40 µ m, blow molded film	950	%
Drop hammer impact
40 µ m, blow molded film	60	g	ASTM D1709-A
Elmandorf tear strength			ASTM D1922
MD: 40 µ m, blow molded film	24	g
TD: 40 µ m, blow molded film	68	g

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.