| About |
|---|
| Glass fiber reinforced PA66 with hydrolyzing resistance Pamphlet: The special material has good mechanical properties and the flexural strength reaches 100MPa even after eroding at 135°C in 100% glycol solution for 48 hours. The material accords with the standard of the automobile water tank and can be used to produce automobile water tank and its accessory.&& |
| Product Description | |
|---|---|
| Supplier | Lihan |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 270 to 300 | °C | |
| Mold temperature | 80 to 120 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 100% Glycol Solution, 135°C, 48 Hours |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |