NYLOY® MS-0800B

About
NYLOY® MS-0800B is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific or North America. Primary attribute of NYLOY® MS-0800B: Impact Resistant.&&

Product Description
Supplier	Nytex
Generic	PA66
Material Status	Commercial: Negative
Features	High impact resistance
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.56	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
tensile strength	49.0	MPa	ASTM D638
Tensile strain
fracture	60	%	ASTM D638
Bending modulus	2060	MPa	ASTM D790
bending strength	78.5	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	590	J/m	ASTM D256

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.