Jampilen RP270G

About
Jampilen RP270G is a medium modified polyropylene random copolymer specifically designed for blow molding and sheet extrusion and complies with the European Pharmacopeia. Jampilen RP270G offers excellent processability in extrusion blow molding and can be converted on form-fill-seal equipment. The product is also suitable for the extrusion of film and sheet for thermoforming. Jampilen RP270G offers a good impact strength, good clarity and high chemical resistance. Jampilen RP270G is suitable for food contact.&&

About

Jampilen RP270G is a medium modified polyropylene random copolymer specifically designed for blow molding and sheet extrusion and complies with the European Pharmacopeia. Jampilen RP270G offers excellent processability in extrusion blow molding and can be converted on form-fill-seal equipment. The product is also suitable for the extrusion of film and sheet for thermoforming. Jampilen RP270G offers a good impact strength, good clarity and high chemical resistance. Jampilen RP270G is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Food contact compliance,Random copolymer,Solvent resistance,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	120	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	78.0	℃	ASTM D648
Vicat Softening Temp	135	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss	65		ASTM D2457
Haze	32	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	86		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	13	%	ASTM D638
Bending modulus	1000	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.