| About |
|---|
| PRIMALLOY® A1500是一种热塑性弹性体(TPE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。&& |
| Product Description | |
|---|---|
| Supplier | Mitsubishi |
| Generic | TPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.980 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD：2.0 mm | 2.7 | % | ISO 294-4 |
| MD：2.0 mm | 0.50 | % | ISO 294-4 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 11 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 58 | ISO 7619 | |
| tensile strength | |||
| fracture | 8.0 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 790 | % | ISO 37 |
| Compression deformation | |||
| 70℃，22 hr | 61 | % | ISO 815 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60-90 | °C | |
| Drying time | 2.0-6.0 | Hr | |
| Recommended moisture content | <=0.20 | % | |
| Barrel rear temperature | 140-200 | °C | |
| Barrel middle temperature | 150-210 | °C | |
| Barrel front temperature | 160-220 | °C | |
| Nozzle temperature | 170-230 | °C | |
| Mold temperature | 10-60 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |