VESTAMID® Terra DS16-GF30

About
Medium viscosity, easily demoldable, glass fiber-reinforced, heat-stabilized polyamide 1010 compound for injection molding. VESTAMID®Terra DS16-GF30 is a 30 % glass fiber-reinforced, easily demoldable and heat-stabilized polyamide 1010 compound. Due to its mold release properties, VESTAMID Terra DS16-GF30 is suitable for the efficient production of injection molded parts with short cycle times. The parts are characterized by exceptional heat deflection temperature, a high durability and a good dimensional stability. VESTAMID Terra DS16-GF30 is supplied as cylindrical granules, ready for processing, in moisture-proof bags. VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials. VESTAMID® Terra DS is the polycondensation product of 1,10-decamethylene diamine (D) and 1,10-decanedioic acid (sebacic acid—S). Because both monomers are extracted from castor oil, VESTAMID® Terra DS is a material that is based 100% on natural resources. Global Warming Potential (GWP) 3.3kg CO2 by Evonik, PE International.&&

About

Medium viscosity, easily demoldable, glass fiber-reinforced, heat-stabilized polyamide 1010 compound for injection molding. VESTAMID®Terra DS16-GF30 is a 30 % glass fiber-reinforced, easily demoldable and heat-stabilized polyamide 1010 compound. Due to its mold release properties, VESTAMID Terra DS16-GF30 is suitable for the efficient production of injection molded parts with short cycle times. The parts are characterized by exceptional heat deflection temperature, a high durability and a good dimensional stability. VESTAMID Terra DS16-GF30 is supplied as cylindrical granules, ready for processing, in moisture-proof bags. VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials. VESTAMID® Terra DS is the polycondensation product of 1,10-decamethylene diamine (D) and 1,10-decanedioic acid (sebacic acid—S). Because both monomers are extracted from castor oil, VESTAMID® Terra DS is a material that is based 100% on natural resources. Global Warming Potential (GWP) 3.3kg CO2 by Evonik, PE International.&&

Product Description
Supplier	Evonik
Generic	PA 1010
Material Status	Commercial: Active
Features	Good Dimensional Stability,Renewable resources,Low or no water absorption,Durability,Heat Stabilized
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ISO 1183
Water absorption rate
Saturation, 23 ℃	1.4	%	Internal Method
Viscosity number	160	cm³/g	ISO 307

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	7500	MPa	ISO 527-2
tensile strength
yield	130	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	5.0	%	ISO 527-2
fracture	5.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30 ℃, completely fractured	12	kJ/m²	ISO 179/1eA
23 ℃, completely fractured	19	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-30℃	100	kJ/m²	ISO 179/1eU
23℃	100	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
—	201	℃	ISO 306/A
—	196	℃	ISO 306/B
Melting temperature	206	℃	ISO 11357-3

Supplementary information	Nominal value	Unit	Test method
Renewable Carbon Conent	100	%

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2nd heating
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.