Andur M-22 (97% HQEE/ 3%TMP)

About
Andur M-22 is an MDI-Ester prepolymer that, when processed with close attention to handling procedures and formulation, produces high quality elastomers. These elastomers perform very well in dynamic applications.&&

Product Description
Generic	PUR-酯+MDI
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
yield	41.4	MPa	ASTM D412
100% strain	7.58	MPa	ASTM D412
300% strain	14.5	MPa	ASTM D412
Tensile strain
fracture	600	%	ASTM D412
Compression deformation	34	%	ASTM D395

THERMAL	Nominal value	Unit	Test method
storage stability	6.0 to 10	min
stripping time	90	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shaw’s A	94		ASTM D2240
Shaw’s D	45		ASTM D2240
compressive strength			ASTM D695
2% strain	0.965	MPa	ASTM D695
5% strain	1.90	MPa	ASTM D695
10% strain	3.10	MPa	ASTM D695
15% strain	3.72	MPa	ASTM D695
20% strain	5.17	MPa	ASTM D695
25% strain	6.55	MPa	ASTM D695
50% strain	18.6	MPa	ASTM D695
Taber abraser	42.0	mg	ASTM D1044

Process Conditions
injection	Nominal value	Unit	Test method
Mold temperature	110 to 140	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.