| About |
|---|
| Overview: MAGNUM™ 3325MT is a medium heat ABS. Its inherent low gloss combined with a high flow makes it specifically suitable for unpainted interior automotive applications. MAGNUM 3325MT can thereby help you to save up to 50% of the part costs. It is globally available, locally produced in major car production regions. Benefits: Lot to lot consistency allowing for optimal machine parameters settings from the start Self-coloring enabling improvement of costs by using less pigments and lowering your logistic costs Low VOC allowing a better interior air quality facing increasing regulatory and OEMs constraints. Heat stability during wide range of processing temperatures: enhanced part design freedom High scratch and mar resistance for an improved aesthetic durability of the parts Easier recyclability of unpainted part Applications: Matt/unpainted interior automotive applications Mid-consoles Pillars Door liners Glove boxes&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,HB |
| Availabilitys | North America,Latin America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Density | 1.05 | g/cm³ | ISO 1183/B |
| Apparent density | 0.65 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 230℃，3.80kg | 2.5 | g/10min | ASTM D1238 |
| 220℃，10.0kg | 10 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 220℃，10 kg | 11.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.40 to 0.70 | % | ISO 294-4 |
| MD | 0.40 to 0.70 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2070 | MPa | ASTM D638 |
| 3.20 mm, injection molded | 2200 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, 3.20 mm, injection molding | 43.0 | MPa | ISO 527-2/50 |
| yield | 42.3 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 25 | % | ASTM D638 |
| Yield, 3.20 mm, injection molding | 3.3 | % | ISO 527-2/50 |
| Bending modulus | 2210 | MPa | ASTM D790 |
| 3.20 mm, injection molded | 2100 | MPa | ISO 178 |
| bending strength | 64.5 | MPa | ASTM D790 |
| bending strength | |||
| 3.20 mm, injection molded | 65.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30 ℃, molded | 8.0 | kJ/m² | ISO 179/2 |
| -30 ℃, injection molding | 11 | kJ/m² | ISO 179/1eA |
| 23 ℃, injection molding | 17 | kJ/m² | ISO 179/1eA |
| 23 ℃, molded | 12 | kJ/m² | ISO 179/2 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| 23℃，3.2mm | 310 | J/m | ASTM D256 |
| -30℃ | 10 | kJ/m² | ISO 180-1A |
| 23℃ | 17 | kJ/m² | ISO 180-1A |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -29℃，3.20 mm，Peak Energy | 31.7 | J | ASTM D3763 |
| -29℃，3.20 mm，Total Energy | 34.3 | J | ASTM D3763 |
| 23℃，3.20 mm，Peak Energy | 31.1 | J | ASTM D3763 |
| 23℃，3.20 mm，Total Energy | 45.4 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 101 | ℃ | ISO 75-2/A |
| 1.8 MPa, unannealed, 3.2 mm | 82.8 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 3.2 mm | 96.1 | ℃ | ASTM D648 |
| Vicat Softening Temp | 108 | ℃ | ASTM D1525 |
| B50 | 102 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion | |||
| MD | 9.4E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | |||
| 2.0 mm | 60 | mm/min | ISO 3795 |
| Flame retardant level | UL 94 | ||
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 | |
| carbon emission | 20.0 | µg/g | VDA 277 |
| Fogging（100℃） | 98 | % | ISO 6452 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 3. 3-points |
| 4. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |