DuPure® T 88 E

About
Description DuPure T 88 E is a polypropylene homopolymer fibre grade characterized by high flowability, a narrow to medium molecular weight distribution, and medium crystallinity, providing excellent and consistent process- and product behaviour. The product comprises an advanced phenol free stabilizer package, providing superior gas fading resistance and inherent basic UV stability. Applications DuPure T 88 E is suitable for: continuous filaments (CF), high-resilience bulked continuous filaments (BCF), and fine denier staple fibres.&&

About

Description DuPure T 88 E is a polypropylene homopolymer fibre grade characterized by high flowability, a narrow to medium molecular weight distribution, and medium crystallinity, providing excellent and consistent process- and product behaviour. The product comprises an advanced phenol free stabilizer package, providing superior gas fading resistance and inherent basic UV stability. Applications DuPure T 88 E is suitable for: continuous filaments (CF), high-resilience bulked continuous filaments (BCF), and fine denier staple fibres.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,High liquidity,Food contact compliance,Elastic,Weight distribution,Solvent resistance,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	25	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	1.5	kJ/m²	ISO 179/1eA
23℃	2.5	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength			ISO 179/1eU
-30℃	13	kJ/m²	ISO 179/1eU
23℃	110	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ISO 75-2/B
1.8 MPa, unannealed	55.0	℃	ISO 75-2/A
Vicat Softening Temp
—	154	℃	ISO 306/A
—	90.0	℃	ISO 306/B
Melting temperature
DSC	163	℃	ISO 3146

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	78.0	MPa	ISO 2039-1
Tensile modulus	1500	MPa	ISO 527-1-2
tensile strength
yield	35.0	MPa	ISO 527-2/50
Tensile strain			ISO 527-2/50
yield	8.0	%	ISO 527-2/50
fracture	> 50	%	ISO 527-2/50

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.