| About |
|---|
| Kingfa PVC-NB60是一种聚氯乙烯材料,。 该产品在北美洲或亚太地区有供货,加工方式为:注射成型。 Kingfa PVC-NB60的主要特性有: 环保/绿色 耐热 无毒 增塑 典型应用领域包括: 生活消费品 汽车行业 手柄 体育用品 |
| Product Description | |
|---|---|
| Supplier | Kingfa |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Renewable resources,No DEHP plasticizer,Sprayable,Heat Resistance, Good,Soft,Nontoxicity |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 60 | ASTM D2240 | |
| tensile strength | 9.50 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 320 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 to 80 | °C | |
| Drying time | 2.0 | hr | |
| Barrel rear temperature | 140 to 160 | °C | |
| Barrel middle temperature | 150 to 170 | °C | |
| Barrel front temperature | 160 to 180 | °C | |
| Processing (melt) temperature | 140 to 160 | °C | |
| Mold temperature | 30 to 50 | °C | |
| Injection speed | 慢to中等 | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |