Valtec HG009 - SOLIAO

About
Compared to a pellet-form polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. Valtec HG009 is a homopolymer particularly suitable for general purpose injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Wide processing window Improved mechanical and physical properties Improved gloss and finish Typical Applications: General purpose injection Toys Caps Small housewares&&

About

Compared to a pellet-form polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. Valtec HG009 is a homopolymer particularly suitable for general purpose injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Wide processing window Improved mechanical and physical properties Improved gloss and finish Typical Applications: General purpose injection Toys Caps Small housewares&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Good surface appearance,Food contact compliance,Homopolymer
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	6.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	34.0	MPa	ASTM D638
Tensile strain
yield	10	%	ASTM D638
Bending modulus	1480	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	27	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	88.9	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.