| About |
|---|
| PTS PCA-30G00是一种聚碳酸酯+聚丁烯对苯二甲酸酯（PC+PBT）产品,。 它,在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货。 特性包括: 阻燃/额定火焰 冲击改性&& |
| Product Description | |
|---|---|
| Generic | PC+PBT |
| Material Status | Commercial: Active |
| Features | High impact resistance,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 250℃，3.80kg | 15 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.75 to 1.0 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.030 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 3.17 mm | 53.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.17 mm | 120 | % | ASTM D1708 |
| Bending modulus | |||
| 3.17 mm | 2000 | MPa | ASTM D790 |
| bending strength | |||
| 3.17 mm | 82.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 3.2mm | 800 | J/m | ASTM D256 |
| 20℃ | 530 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 101 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 98.9 | ℃ | ASTM D648 |
| Relative temperature index | 75.0 | ℃ | UL 746 |
| Electrical performance | 75.0 | ℃ | UL 746 |
| Impact mechanical performance | 75.0 | ℃ | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |