| About |
|---|
| Monprene CP-18960 is a clear general purpose thermoplastic elastomer, available in NAT and BLK, designed for a variety of industrial and consumer product applications requiring a soft, rubber-like feel. Monprene CP-18960 is a medium hardness, low density, unfilled, UV resistant grade that is suitable for extrusion and injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good Clarity,Smoothness,Low density,Moderate liquidity,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 62 | ||
| Shore A, 5 seconds | 60 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 9.65 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 33.3 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 18 | % | ASTM D395B |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 182 to 232 | °C | |
| Barrel middle temperature | 188 to 238 | °C | |
| Barrel front temperature | 193 to 243 | °C | |
| Nozzle temperature | 199 to 249 | °C | |
| Processing (melt) temperature | 199 to 249 | °C | |
| Mold temperature | 35 to 49 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Injection speed | 快速 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 182 to 232 | °C | |
| Barrel 2 zone temperature | 188 to 238 | °C | |
| Barrel 3 zone temperature | 193 to 243 | °C | |
| Barrel 4 zone temperature | 193 to 243 | °C | |
| Barrel 5 zone temperature | 199 to 249 | °C | |
| Nozzle temperature | 199 to 249 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |