| About |
|---|
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | Good stripping performance,Good wear resistance,Sprayable,Ultra high molecular weight,Good Printability,Good surface appearance,Food contact compliance,High scratch resistance,Smoothness,Kosher certification,Lubricating,Excellent Processability |
| Availabilitys | Europe,North America |
| Process Methods | Injection Molding,Extrusion |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| Extrusion Molded | Nominal value | Unit | Test method |
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |