| About |
|---|
| Softflex® 7088 is a Thermoplastic Elastomer Alloy (TPE Alloy) product. It is available in North America. Typical application: Engineering/Industrial Parts. Primary characteristic: chemical resistant.&& |
| Product Description | |
|---|---|
| Generic | 其他TPE合金 |
| Material Status | Commercial: Active |
| Features | Optical performance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, 23 ℃, 3.18 mm | 10.5 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, 23 ℃, 3.18 mm | 800 | % | ASTM D412 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 70 | ASTM D2240 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 160 to 185 | °C | |
| Barrel front temperature | 180 to 207 | °C | |
| Nozzle temperature | 207 to 232 | °C | |
| Mold temperature | 29 to 66 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |