| About |
|---|
| DIAMALOY ABSPC 750 HF is a Polycarbonate + ABS (PC+ABS) product. It is available in North America. Characteristics include: Flame Rated WEEE Compliant Flame Retardant Halogen Free&& |
| Product Description | |
|---|---|
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,V-0 |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 230℃，3.80kg | 14 | g/10min | ISO 1133 |
| 200℃，5.0kg | 26 | g/10min | ASTM D1238 |
| 230℃，3.80kg | 27 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 230℃，3.8 kg | 14.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.40 to 0.80 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2700 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 60.0 | MPa | ASTM D638 |
| yield | 55.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Fracture, injection molding | > 100 | % | ISO 527-2/50 |
| yield | 2.5 | % | ASTM D638 |
| Bending modulus | 2650 | MPa | ASTM D790B |
| Bending modulus | 2840 | MPa | ISO 178 |
| bending strength | 89.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 17 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | |||
| 3.2mm | 530 | J/m | ASTM D256-A |
| 23℃ | 42 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 82.2 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 73.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 105 | ℃ | ASTM D1525 7 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 2.00 mm | V-0 5VB | UL 94 | |
| 3.00 mm | V-0 5VB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Procedure A |
| 3. Type I, 2.0 in/min |
| 4. 1.95 in/min |
| 5. Method I (3 point load), 0.050 in/min |
| 6. 0.079 in/min |
| 7. Rate B (120°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |