| About |
|---|
| FT5236 is a Low Density Polyethylene for Film Extrusion. Tubular Technology. Includes Anti-block and Medium Slip additives.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | High anti-blocking,Inoxidizability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.75 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Self dynamic, blow molded film | 0.20 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 40 | µm | |
| Secant modulus | |||
| TD, 40 µ m, blow molded film | 260 | MPa | ASTM D882A |
| MD, 40 µ m, blow molded film | 230 | MPa | ASTM D882A |
| tensile strength | ISO 527-3 | ||
| MD, 40 µ m, blow molded film | 27.0 | MPa | ISO 527-3 |
| TD, 40 µ m, blow molded film | 24.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture, 40 µ m, blow molded film | 250 | % | ISO 527-3 |
| TD, fracture, 40 µ m, blow molded film | 550 | % | ISO 527-3 |
| Drop hammer impact | |||
| 40 µ m, blow molded film | 120 | g | ISO 7765-1 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD: 40 µ m, blow molded film | 4.0 | N | ISO 6383-2 |
| TD: 40 µ m, blow molded film | 2.0 | N | ISO 6383-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Multi axis instrument impact energy | |||
| 0.0400 mm, blown film, Total Penetration Energy | 2.50 | J | ISO 6603-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 112 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 40 µ m, blow molded film | 85 | ASTM D2457 | |
| Haze | |||
| 40 µ m, blow molded film | 8.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 160 to 190 | °C | |
| Notes |
|---|
| 1. Synthetic Silica |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |