Hyflon® MFA® P6022

About
Hyflon® MFA P6022 is a clear, semi-crystalline melt processable perfluorinated resin. Due to its characteristic free-flowing properties, it is designed for use in rotomolding and rotolining applications. Rotomolding is typically used to manufacture articles such as tanks, bottles and vessels whilst rotolining is used to coat pipes, fittings, valves and tanks. Hyflon® MFA P6022 exhibits excellent chemical inertness, excellent thermal and flame resistance and very low surface energy. Additionally Hyflon® MFA P6022 shows excellent smooth surface finish, very low coefficient of friction and outstanding optical properties. Main features of Hyflon MFA® P6022 include: Excellent flowability Excellent chemical inertness Outstanding surface finish Excellent thermal resistance Very low coefficient of friction&&

About

Hyflon® MFA P6022 is a clear, semi-crystalline melt processable perfluorinated resin. Due to its characteristic free-flowing properties, it is designed for use in rotomolding and rotolining applications. Rotomolding is typically used to manufacture articles such as tanks, bottles and vessels whilst rotolining is used to coat pipes, fittings, valves and tanks. Hyflon® MFA P6022 exhibits excellent chemical inertness, excellent thermal and flame resistance and very low surface energy. Additionally Hyflon® MFA P6022 shows excellent smooth surface finish, very low coefficient of friction and outstanding optical properties. Main features of Hyflon MFA® P6022 include: Excellent flowability Excellent chemical inertness Outstanding surface finish Excellent thermal resistance Very low coefficient of friction&&

Product Description
Supplier	Solvay
Generic	全氟聚合物
Material Status	Commercial: Active
Features	Good surface appearance,Optical performance,Low coefficient of friction,Hypocrystalline,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ASTM D792
Melt Flow Rate
372℃，5.0kg	2.0 to 5.0	g/10min	ASTM D1238
Average particle size	300	µm	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting temperature	285	℃	ASTM D4591

Notes
1. Typical properties: these are not to be construed as specifications.
2. Laser Diffraction
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.