| About |
|---|
| Vi-Chem PVC V221-70I是一种聚氯乙烯材料,含有的填充物为18% 填料。 该产品在北美洲有供货,。 Vi-Chem PVC V221-70I的典型应用领域为:汽车行业&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.31 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 10.5 | MPa | ASTM D412A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 70 | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature flexibility | |||
| -30℃ | Pass | GM 9503P |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | SE | FMVSS 302 | |
| atomization | Pass | GM 9305P |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| High Temperature Humidity Resistance | Pass | GM 9328P | |
| Volatile loss | |||
| 105℃ | 1.6 | % | ASTM D1203 |
| Xenon aging test | |||
| Interior，Delta E | 0.180 | SAE J1885 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |