| About |
|---|
| Arnite®（PBT,PET和混合物）是高性能工程塑料，集高强度、刚性和完美的加工特性于一身。所以，Arnite® A (PET)和 Arnite® T (PBT)广泛适用于汽车、电子电气以及消费品行业。&&Arnite®产品丰富，有未增强、增强以及阻燃型号。 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good stripping performance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.64 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.95 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 12000 | MPa | ISO 527-1-2 |
| Fracture stress | 170 | MPa | ISO 527-1/-2 |
| Tensile strain | |||
| fracture | 2.5 | % | ISO 527-1/2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Relative permittivity | |||
| 1 MHz | 3.1 | IEC 60250 | |
| Dissipation factor | |||
| 100 Hz | 30 | E-4 | IEC 60250 |
| Volume resistivity | >1E15 | ohms·cm | IEC 60093 |
| Dielectric strength | 34 | kV/mm | IEC 60243-1 |
| Compared to the leakage tracing index | 250 | V | IEC 60112 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | 0.45 | % | ISO 62 |
| Moisture absorption rate | 0.18 | % | Sim. to ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| -30℃ | 50 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| -30℃ | 7 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| 10℃ / min | 255 | ℃ | ISO 11357-1/-3 |
| Hot deformation temperature | |||
| 1.8 MPa | 230 | ℃ | ISO 75-1/2 |
| Linear coefficient of thermal expansion | |||
| MD | 0.4E-4 | /℃ | ISO 11359-1/-2 |
| Melt density | 1350 | kg/m³ | – |
| Melt thermal conductivity | 0.195 | W/(m K) | – |
| Specific heat of melt | 1670 | J/(kg K) | – |
| Thermal diffusivity | 8.67E-8 | m²/s | – |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |