| About |
|---|
| PVDF copolymer made by VDF(vinylidene fluoride) and HFP(hexafluoropropylene), with excellent mechanical properties, heat resistance and flame resistance, PVDF copolymer can bear high temperature, corrosive chemicals etc harsh working environment, which has low smoke, low fog, low flame spread characteristics, mainly used for cable and wire.&& |
| Product Description | |
|---|---|
| Supplier | Ofluorine |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Low smoke,Low to No Fogging,Flame Characteristics,High Heat Resistance,Copolymer,Solvent resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.77 to 1.78 | g/cm³ | ISO 1183/D |
| Melt Flow Rate | |||
| 230℃,5.0kg | 3.0 to 8.0 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 800 | J/m | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 141 to 144 | ℃ | ISO 3146 |
| Hot deformation temperature | 48 | ℃ | ISO 75-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 43 | % | ASTM D2863 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| component | VDF/HFP | ISO 12086 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 68 | ISO 868 | |
| tensile strength | > 26.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | > 100 | % | ISO 527-2 |
| Bending modulus | 680 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
