Pemex BDL 92020 C

About
Pemex BDL 92020 C is a Linear Low Density Polyethylene product. It is available in Latin America or North America. Characteristics include: Antiblock Slip&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
Secant	195	MPa	ASTM D638
tensile strength
fracture	16.0	MPa	ASTM D638
Tensile strain
fracture	450	%	ASTM D638

film	Nominal value	Unit	Test method
Drop hammer impact	85	g	ASTM D1709

elastic body	Nominal value	Unit	Test method
tear strength	31.0	kN/m	ASTM D1004

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.