Polyclear® PET T-94

About
Polyclear® PET T-94 from Indorama Ventures Polymers México, S. de R.L. de C.V. (“IVPM”) designed to have slow re-crystallization rate, for the manufacture of carbonated soft drinks returnable bottles, with a nominal intrinsic viscosity of 0.86 dl/g. Polyclear® PET T-94 has excellent melt and crystallization properties, offering easy processing in injection molding and stretch-blow molding for carbonate soft drinks returnable bottles. Showing an improved performance regarding anti-scuffing behavior and caustic stress resistance. This PET resin complies with the Federal Food, Drug, and Cosmetic Act for certain food contact applications. Please contact IVPM for specific FDA clearances. Containers made from IVPM, are lightweight, recyclable, have excellent clarity, and are shatterproof.&&

About

Polyclear® PET T-94 from Indorama Ventures Polymers México, S. de R.L. de C.V. (“IVPM”) designed to have slow re-crystallization rate, for the manufacture of carbonated soft drinks returnable bottles, with a nominal intrinsic viscosity of 0.86 dl/g. Polyclear® PET T-94 has excellent melt and crystallization properties, offering easy processing in injection molding and stretch-blow molding for carbonate soft drinks returnable bottles. Showing an improved performance regarding anti-scuffing behavior and caustic stress resistance. This PET resin complies with the Federal Food, Drug, and Cosmetic Act for certain food contact applications. Please contact IVPM for specific FDA clearances. Containers made from IVPM, are lightweight, recyclable, have excellent clarity, and are shatterproof.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Renewable resources,Food contact compliance,High crystallization
Availabilitys	Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	Internal Method
Apparent density	0.86	g/cm³	Internal Method
Intrinsic viscosity	0.86	dl/g	Internal Method
Acetaldehyde	0.50	ppm	Internal Method
Color b	-4.50		Internal Method
Crystallinity	51	%	Internal Method
water content	0.15	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting temperature	236	℃	Internal Method

Supplementary information	Nominal value	Unit	Test method
Chip Size	65.0	pcs/g	Internal Method
Fines	< 0.10	%	Internal Method
Yellow Chips	< 9.00	pcs/125 g	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. Determined by conversion of solution viscosity to intrinsic viscosity using an empirical correlation developed by Indorama Ventures Polymers México.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.