Matrixx FP63E23

About
Matrixx FP63E23 is a Polyamide 6 (Nylon 6) product filled with 23% glass fiber. It is available in North America. Primary characteristic: flame rated.&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ASTM D792
Shrinkage rate
MD	0.20 to 0.50	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃, 3.18 mm	145	MPa	ASTM D638
Bending modulus
Tangent, 23 ℃, 3.18 mm	6210	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	64	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, 3.2 mm	196	℃	ASTM D648
0.45 MPa, unannealed, 3.2 mm	202	℃	ASTM D648
Relative temperature index
Electrical performance	65.0	℃	UL 746
Strength mechanical performance	65.0	℃	UL 746
Impact mechanical performance	65.0	℃	UL 746

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

Supplementary information	Nominal value	Unit	Test method
Ash Content	23	%	ASTM D5630

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.