| About |
|---|
| Novodur® P2MC is an injection molding grade especially suitable for electroplating, providing high flowability. FEATURES Electroplating grade High flowability Good impact resistance APPLICATIONS Household appliances Sanitary shower heads Tea pots&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 25 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| Fracture, 23 ℃ | 2.40 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 2200 | MPa | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 96 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, annealed | 94 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| A50 | 95 | ℃ | ISO 306/A50 |
| Linear coefficient of thermal expansion | |||
| MD | 0.00010 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | 1.0E+13 | Ω.cm | IEC 60093 |
| Insulation strength | |||
| 18 | KV/mm | IEC 60243-1 | |
| Dielectric constant | |||
| 2.80 | 100 Hz | IEC 60250 | |
| Dissipation factor | |||
| 0.0050 | 100 Hz | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | HB | UL-94 | |
| 3.00mm | HB | UL-94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | NB | kJ/m² | ISO 179/1eU |
| -30℃ | 150 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 24 | kJ/m² | ISO 179/1eA |
| -30℃ | 14 | kJ/m² | ISO 179/1eA |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4h/80°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |