Vipel® F737-BCX-00

About
AOC’s Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes. BENEFITS Internationally Recognized Vipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc. Corrosion Resistance This resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.&&

About

AOC’s Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes. BENEFITS Internationally Recognized Vipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc. Corrosion Resistance This resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.&&

Product Description
Generic	间苯二甲酸聚酯
Material Status	Commercial: Active
Features	Corrosion Resistant,Acidproof,Elastic
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
styrene content	40	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	220	J/m	ASTM D4812

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	91.7	℃	ASTM D648

Supplementary information	Nominal value	Unit	Test method
Gel to Peak	18.0	min
exothermic peak	190	℃

Uncured Properties	Nominal value	Unit
Density	1.10	g/cm³
viscosity
25℃，Brookfield RVT	0.45	Pa·s
Gelation time
25℃	12	min

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	39		ASTM D2583
Tensile modulus	3380	MPa	ASTM D638
tensile strength	85.5	MPa	ASTM D638
Tensile strain
fracture	4.0	%	ASTM D638
Bending modulus	3930	MPa	ASTM D790
bending strength	141	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.