| About |
|---|
| Product Description | |
|---|---|
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.2 | g/cm³ | ASTMD792 |
| Melt flow rate | 9 | g/10min | ASTMD1238 |
| Water absorption rate | 0.2 | % | ASTMD570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 125 | ℃ | ASTMD648 |
| Flame retardancy | |||
| 1.5mm | V2 | UL-94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 59 | MPa | ASTMD638 |
| bending strength | 95 | MPa | ASTMD790 |
| Bending modulus | 2250 | MPa | ASTMD790 |
| IZOD Notch Impact Strength | 12 | KJ/㎡ | ASTMD256 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Extruded product transmittance | |||
| 1.0mm | ＞90 | % | 积分球 |
| Forming parameters | 120℃干燥2-4小时 | 干燥 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |