DuPont™ 20 Series DPE-2010

About
DuPont™ 20 Series DPE-2010, specialty low density polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance. Features: Contains Oleamide as a slip agent. Characteristics/Benefits: DPE-2010 specialty polyethylene resins conform to the requirements of ASTM D1248-69, Type I, Class A, Category 3. Applications: Injection blow molded bottles and tubes, and extruded tubing in particular used in medical, pharmaceutical, and personal care packaging&&

About

DuPont™ 20 Series DPE-2010, specialty low density polyethylene resin is characterized by low melt index and intermediate crystallinity. This product, produced via a unique polymerization process, has outstanding flexibility and environmental stress crack resistance. Features: Contains Oleamide as a slip agent. Characteristics/Benefits: DPE-2010 specialty polyethylene resins conform to the requirements of ASTM D1248-69, Type I, Class A, Category 3. Applications: Injection blow molded bottles and tubes, and extruded tubing in particular used in medical, pharmaceutical, and personal care packaging&&

Product Description
Supplier	DuPont
Generic	LDPE
Material Status	Commercial: Active
Features	Good flexibility,Low liquidity,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Density	0.920	g/cm³	ISO 1183
Melt Flow Rate	1.9	g/10 min	ASTM D1238
190℃，2.16kg	1.9	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	96.0	℃	ASTM D1525
Vicat Softening Temp	96.0	℃	ISO 306
Melting peak temperature	109	℃	ASTM D3418
Melting temperature
DSC	109	℃	ISO 3146
freezing point
—	96	℃	ISO 3146
—	96	℃	ASTM D3418

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 235	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.