| About |
|---|
| The EnvisionTEC ABS 3SP™ White material is a fast-growing, tough material with similar characteristics to ABS plastic. Applications Aerospace, Animation and Entertainment, Architecture and Art, Automotive, Consumer Packaged Goods, Dental/Orthodontic, Education, Electronics, MCAD, Sporting Goods, Toys Recommended Machines: ULTRA® 3SP™ and 3SP™ HD, 3Dent™, ULTRA® 3SP™ Ortho, Xede® 3SP™, Xtreme® 3SP™&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good flexibility |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Notched impact strength of cantilever beam | 21 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 70.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 43.3 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 85 | ASTM D2240 | |
| Tensile modulus | 1500 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 35.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 3.7 | % | ASTM D638 |
| Bending modulus | 2290 | MPa | ASTM D790 |
| bending strength | |||
| fracture | 81.4 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |