Adstif HA716J - SOLIAO

About
LyondellBasell Australia’s Polypropylene grade HA716J is a high stiffness homopolymer with a broad molecular weight distribution and is specially designed for metallised biaxially oriented films (BOPP) film applications. HA716J offers better hot fill performance and improved metallisable barrier levels. HA716J can also be used in lamination film and compounding applications.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Wide molecular weight distribution,Electroplating,Homopolymer
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183/D
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	4.5	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	100	℃	ISO 75-2/B
Vicat Softening Temp	158	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	76		ISO 868
tensile strength
yield	36.0	MPa	ISO 527-2
Bending modulus	1800	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.