Hanwha Total PP BB110

About
Description BB110 is the block HIPP for sheet & thermoforming application. Hanwha Total impact polypropylene shows an excellent balance between stiffness and impact strength at low temperature as well as good processability. Characteristics Excellent balance between stiffness and impact strength Good appearance & processability Applications DANPLA Sheet, TMF sheet&&

Product Description
Supplier	HANWHA
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Block Copolymer,Good melt strength,low-temperature impact resistance
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	0.50	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	78	J/m	ASTM D256
0℃	120	J/m	ASTM D256
23℃	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	82		ASTM D785
tensile strength
yield	29.4	MPa	ASTM D638
Tensile strain
fracture	500	%	ASTM D638
Bending modulus	1270	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.