Rigidex® HD6070UA

About
Rigidex® HD6070UA is a UV-stabilised high density polyethylene grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Typical applications Crates Boxes Seats Pallets Benefits and Features Easy processing High rigidity Good impact strength High warpage resistance Good weathering resistance&&

Product Description
Supplier	INEOS
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Excellent Processability,High impact resistance,High elastic,Weight distribution,High density
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1872
Melt Flow Rate
190℃，2.16kg	7.6	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	68		ISO 868
tensile strength
Yield, 23 ℃	31.0	MPa	ISO 527-2/2
Bending modulus
23℃	1300	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	4.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	127	℃	ISO 306/A
Melting temperature	132	℃	ASTM D2117
Linear coefficient of thermal expansion
MD	2.0E-4	1/℃	ASTM D696
specific heat	2300	J/kg/℃
Thermal conductivity coefficient	0.48	W/m/K	ASTM C177

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.